18x18MM FM11RF08 RFID Wet Inlay
18x18MM FM11RF08 RFID Wet Inlay
Basic Feature
The RFID inlay consists of two components. An integrated circuit or microchip that stores personal identifying information attaches to a small coil of aluminum, copper or silver wires called the antenna, which transmits and receives radio frequency signals. The microchip and antenna are then placed on a label, and the entire unit is encased in plastic.
Our Inlay is covered in the surface material to form the final label. These are some materials:
1. Coated Paper: Low cost, easy to print on.
2. PET: Waterproof, heatproof, environmental protection.
3. PVC: Waterproof, corrosion resistance, high-temperature resistance.
4. Normal Double-sided adhesive: Robust, widely used, and cheaper than 3 M Glue.
5. 3 M Glue: Higher cost but strong viscosity, good temperature tolerance & anti-corrosion.
6. Electrostatic adhesive: Electrostatic prevention, high-temperature resistance, strong water resistance
For die-cutting, the minimum size should be 4mm bigger than inlay normally.
Parameters | |
IC | FM11RF08 |
Memory | 1K bytes |
Frequency | 13.56MHz |
Material | PET |
Available Material | Soft PVC, Paper |
Antenna Size | 15X15MM / 0.59X0.59〃 |
Die-cut Size | 18x18MM / 0.7X0.7〃 |
Available Die Cut Size | Round Shape: Ø20mm/ 26mm/ 29mm/ 30mm/ 35mm/ 38mm/ 40mm/ 50mm Square Shape: 20x20mm/ 25x25mm/ 30x30mm/ 35x35mm/ 40x40mm/ 45x45mm/ 50x50mm Rectangle Shape: 12x20MM/ 15X20MM/ 15X30MM/ 20X40MM/ 25X40mm/ 25X38mm/ 18x56MM/ 54x86MM |
NFC Chip Available | MF 1k / 4k,MF Ntag213/215/216, MF Ultralight /-C, MF DESFire 2K/4K/8K,MF Plus-X /S 2K/4K , TI2048,SRT512,FELICA-LITE-S,Topaz512 ,SLE 66R35,SLE 66R01 |
Operating Temperature | -25°C to 70°C / -13°F to 158°F |
Craft | Logo Printing |
Available Craft | Number /QR Code / UID Printing , Data encoding , Anti-Metal Epoxy Surface etc |
Adhesive | Acrylic, water borne adhesive |
Adhesive Usage Temperature | min. -20°C to 80°C / min. -4°F to 176°F |
Qty/Roll | Mini 1000 pcs per Roll |
Core Size | 76mm / 3“ |
Shelf Life: minimum of 2 years from the date of manufacture in | 20°C / 68°F, 50% RH |
Common Chip Types | Protocol | Capacity | Anti-collision | Function |
Available 125KHz Chip | ||||
TK4100 | / | 64 bits | No | Read Only |
EM4200 | / | 128 bits | No | Read Only |
EM4305 | / | 512 bits | No | Read/Write |
T5577 | / | 330 bits | No | Read/Write |
Available 13.56MHz Chip | ||||
Ntag213 | ISO14443A | 180 byte | No | Read/Write |
Ntag215 | ISO14443A | 540 byte | No | Read/Write |
Ntag216 | ISO14443A | 924 byte | No | Read/Write |
MF Classic 1K | ISO14443A | 1KB | No | Read/Write |
MF Classic 4K | ISO14443A | 4KB | No | Read/Write |
MF Plus S 1K | ISO14443A | 2KB/4KB | No | Read/Write |
MF Ultralight EV1 | ISO14443A | 48 byte | No | Read/Write |
MF Ultralight C | ISO14443A | 144 byte | No | Read/Write |
ICODE SLIX | ISO15693 | 1024 bits | Yes | Read/Write |
Available 860-960MHz Chip | ||||
Alien H3 | ISO18000-6C | 512 bits | Yes | Read/Write |
Other chips are also available. | ||||
Ntag are registered trademarks of and are used under license.ICODE are registered trademarks of and are used under license.MF and MF Classic are trademarks of MF and MF Ultralight are registered trademarks of and are used under license.MF and MF Plus have registered trademarks of and are used under license. |
Product Details
Common Package
Note:
Volume
1000pcs/ 2000pcs/ 5000pcs in one roll,
10,000pcs/ 50,000pcs/ 100,000pcs per carton
Weight
About 2KG for 1000 pcs
Carton Size
49*23*20 cm
49*23*26 cm
Special demands for packing available.
Applications
Available Applications:
virtually on any surface, metal, plastic, wood, paper, used for animal tracking, library management, mobile phone payment, anti-fake wine management, etc.
© 2024 XINYETONG TECHNOLOGY DEVELOPMENT CO.,LTD All Right Reserved Asiarfid